In cases where the teeth are subject to material loss for various reasons or for aesthetic purposes, restoration processes made of different materials are called dental veneers. Dental veneer prices in Thailand are often wondered in this context.
In cases where material losses due to caries or trauma cannot be repaired with filling, veneers can be used to change the appearance of the teeth in terms of aesthetics and replace the lost teeth. In some cases, at the stage of coating the teeth, some abrasion of the teeth can be done. Abrasion amounts vary according to the type of prosthesis to be made and aesthetic expectations. In some cases, tooth veneer can be performed without abrasion on the teeth.
Preferred materials for coating may be metal or non-metallic. It is possible to obtain a natural appearance by making ceramic on metal or aesthetically dominant materials. The use of precious metals and alloys for infrastructure support reduces the tendency to allergic reactions.
Dentists will determine the appropriate veneer options according to the general health status and expectations of the patients. It is very important to stick the veneers with an adhesive that does not harm the tooth tissue. Apart from bonding, it is possible to apply with screws for over-implant coatings .
Coatings made by hand in laboratories or by using CAD-CAM technology can be used for a lifetime easily. The duration of use of the veneers varies depending on the oral health conditions, the harmony of the veneered teeth and the surrounding tissues over the years.
How Is Dental Veneer Made?
Dental veneer treatment is a matter of curiosity, especially in the event of undesirable conditions such as decay . After the cavities are cleaned, the tooth is covered with different materials in order to regain its old appearance.
For dental veneers, it is important for patients to be examined by a specialist dentist first. Afterwards, it is necessary to decide which of the coating types will be made. After the measurements of the teeth are taken, the teeth cleaning process is performed. While cleaning the teeth, molds must be placed on the teeth at certain times. The purpose of the molds is to understand whether the tooth is in the desired shape.
If the tooth is not fully seated in the mold, reshaping of the tooth is performed after the mold is removed. If the mold is fully seated during the repetition of this process, it will be understood that the tooth has taken the appropriate shape. After the coating is placed on the tooth, the coating is placed on the tooth with the help of special adhesives. In this way, the tooth will get rid of the caries structure.
If everything is suitable for the veneer process, the procedure is carried out in a short time like 3 sessions. However, in some cases, according to the doctor’s request, if the condition of the patients is favorable, it is possible to perform dental veneers in 2 sessions. It is possible for the veneer to fit better when there is a difference of 2 or 3 days between the sessions while the tooth is veneered .
It is very important that people do not disrupt their oral care after dental veneers are made. Teeth should be brushed at least twice a day. In addition, the use of dental floss is a very important issue for people who have veneer teeth. Extra care should be done after the tooth is veneered. Routine maintenance of veneers like a normal tooth is an important issue.
What are the Benefits of Dental Veneers?
advantages of dental veneers , it is one of the most preferred treatment methods today. One of the most important benefits of the veneer is the improvement of the appearance of the teeth and a brighter and more beautiful smile. Coating processes are often preferred in order to eliminate cosmetic problems.
- Damaged, broken or chipped teeth
- Teeth with severe discoloration or uneven coloration that cannot be corrected with the whitening technique
- have gaps in the teeth
- Teeth much smaller than average
- Teeth that are pointed or have an unusual shape
Coatings can last for ten years or more, depending on the type of coating chosen. This increases people’s confidence in their smiles.
How should the care after dental veneer be?
Dental veneer treatments obtained from specialist dentists are performed in a shorter period of time compared to other dental treatments. In these types of treatment, patients can eat and chew normally after the veneers are bonded in place.
Sometimes coatings can be a bit harsh right after they are applied. After a few days of eating and brushing, the rough parts will wear off. Otherwise, you can go to your dentist and ask for them to be corrected.
Taking some precautions and maintenance after the dental veneer process helps to increase the maintenance times of the veneers. Precautions and care recommendations recommended by specialist physicians are as follows;
- Hard objects such as ice should not be chewed.
- Gnawing on hard objects such as nails and the back of a pencil should be avoided.
- Food should not be chewed with the front teeth. Especially in the consumption of hard food, it is necessary to take care to chew with the back teeth.
- Teeth should not be used to open the packaging of the products.
- People involved in impact sports should wear mouth guards.
If you pay attention to these issues after dental veneer, you can live with your veneers for many years without any problems.
What are the Types of Dental Veneers?
Dental veneers are a widely preferred method in recent years. It is possible to be treated with different types of dental veneers . Dentists prefer treatment methods that are suitable for their patients. It is possible to choose any of these treatment methods optionally. Each dental veneer has different features and costs differ from each other.
Dentists give complete information to patients about the types of dental veneers. In this way, patients can better choose the coating that they will use for many years. Going to a good dentist for dental veneers helps to get veneer information more easily. Types of dental veneers;
- Zirconium coating
- Metal backed coating
- porcelain laminate veneer
- Full porcelain coating
What are the Materials Used in Dental Veneers?
The materials used in dental veneers are diverse. Coatings are produced from a variety of materials. These materials show continuous improvement in line with technical possibilities. In the process after the veneer, the teeth need regular care as in their natural structure. Dental veneers are often used today;
- full porcelain
- It is made of materials such as metal alloy porcelain.
How are the Dental Veneers Prices?
Porcelain veneers are more expensive than composite resin veneers. Traditional porcelain veneer prices differ per tooth. These coatings are durable for up to 15 years. The prices of composite veneers vary less than porcelain veneers. However, these veneers are not as durable as porcelain veneers.
Zirconium crown makes the teeth look natural. In addition, it has a wear-resistant structure. For this reason, zirconium tooth coating prices are a little more expensive than other methods. Although the cost of quality dental veneers may seem high at first, it is a good investment in terms of its longevity.
Dental Veneer Treatment in Thailand
Dental veneer treatment in Thailand attracts attention with its very affordable price. For this reason, medical tourism is highly developed in the country. Procedures are carried out in clinics equipped by specialist dentists in the country. You can contact us to get information about dental veneer treatment in Thailand .